CA: Electronics,Ignition,Gauges etc

Product Code: aem30-2820

Click to Enlarge

WHAT IT DOES
AEM’s 8 Channel digital multi-channel Twin-Fire Ignition is a multiple-spark twin-capacitive discharge ignition system. The Twin Fire ignition delivers full energy to the spark plug at engine speeds exceeding 10,000 RPM, regardless of the time between ignition events, ensuring that pressurized fuel mixtures are thoroughly ignited. Standard inductive ignition systems typically produce around 250 volts on the coil primary. The Twin Fire's capacitive discharge ignition (CDI) produces a fast, high energy pulse that is applied to the ignition coil that is over 500 volts. This higher primary voltage is what allows the Twin Fire to produce a much higher spark voltage. A typical ignition coil (1:100 turns ratio) with an inductive ignition will produce about 25,000 volts to the spark plug, but using the Twin Fire with the same coil will produce 50,000 volts or more at the spark plug.

WHY YOU WANT ONE
If you have either a high compression, high boost, high RPM or a high horsepower car that demands a lot of spark energy, the AEM Twin Fire is an ideal solution for your ignition system needs.

PRODUCT FEATURES

-Works with coil-on plug and distributed spark systems
-540v primary/54,000v secondary voltage energy
-175-189mJ spark energy per capacitor
-Multi-Strike capability of up to 10 sparks per ignition trigger (20 degrees)
-Smallest (5.5” x 4.625” x 1.375”) and lightest (1.7lbs) CDI on the market
-The 30-2820 is for Five, Six and Eight Cylinder Engines
-Full spark energy with battery voltage as low as 9v
-Tachometer output included
-Extruded enclosure

TECHNICAL FEATURES

Outputs
Operating Voltage: 8-18 volts, negative ground
Operating Current: 12.0 Amps @ 10,000 RPM
RPM Capability: 14,000 RPM, 8ch @ 14 volts
Ignition Inputs: 5,6,7,8 - rising or falling edge
Ignition Outputs: 8
Energy Storage Caps: 1
LED Indicator: Ignition Trigger
Tach Output: +12v square wave
Multi-Strike Duration: ~20 degrees
Energy Output Max: 175-189 milliJoules per spark
Output Voltage: Primary: 500-540 volts
Secondary (assume 100:1): 50,000 to 54,000 volts

Size 5.5"L x 4.6"W x 1.4"H
Weight 1.7 Lbs

PLEASE SEE PRICE LIST LINK BELOW (MS EXCEL)

Estimated Product Shipping Weight inc Packaging: 3.00 Kg

AEM ELECTRONICS PRICE LIST

Product Code: rfacsis

Click to Enlarge

High quality Electronic Amplification System for use on most point-type coils.

Test results show this system delivers an average of 15% graeter voltage to the spark plugs for a more powerful and smoother engine start and performnace.

-Increase average of 8 horse power on an E46 M3.

-Increased engine efficiency at low-end.

-Increased fuel economy, an average saving of 5- 15%.

-Extends ignition timing to 19ms (original about 10ms).

NOTE: Units are priced individually, each engine cylider requires one unit; so a set for a 6 - cylinder engine would be 6 x £34 = £204 gbp.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

Product Code: rfactms

Quality voltage stabilizer module enhances your vehicle's electrical system performance.

-Provides better quality audio sounds, headlight brightness and general "Electrical Efficiency".
-Improves engine response.
-Increased battery life and improved fuel economy.
-Easy installation.
-Can reduce fuel consumption by 5%~10%.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg