CA: Carbon Fibre Products

E36 Factory-style carbon fibre bonnet for 2 & 4 door models.

Available in carbon laminate or full pre preg carbon.

This listing is for carbon laminate (please see Variations for full pre preg carbon version),fully laquered and ready to fit.

Fits onto your existing hinges and latches.

See also VIS vented version bonnet.

Fitting Time: 1.15 hours.
Estimated Installation Cost at CA Workshops: £70.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 10.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: vsswhcps-1

Click to Enlarge

Full carbon fibre wheel caps to fit most models.
Priced as a set of four .

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: jkcfbcsb

Click to Enlarge

100% CARBON FIBRE BUMPER CARRIERS / BEAMS

Many BMW models have heavy metal bumper carriers / supports.

We custom manufacture exact replica replacements but made in 100% carbon fibre for added strength and a huge saving in weight ( eg E39 M5 front carrier in carbon = approximately 3kgs )

Prices vary depending on model, but as an example front and rear carrier pair for the E39 M5 costs £1780.00 / pair ( as of July 2011), please call us for exact costings.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: au3pccfs

Click to Enlarge

3 Piece carbon front splitter for all E36 M tech front bumpers inc M3.

This front splitter will add style and function to any m tech equipt front bumper.

Estimated Product Shipping Weight inc Packaging: 15.00 Kg

Product Code: auenhe36cfb

Click to Enlarge

Carbon fibre bonnet with functional vents for all E36 2dr models inc M3.

This will add style and function to any car.

*(weight shown is shipping weight not actual weight)*

Estimated Product Shipping Weight inc Packaging: 45.00 Kg

Product Code: cacafcabhd

Click to Enlarge

EXAPLE OF E46 3 SERIES VERSION
Click to Enlarge

AS FEATURED IN THE PRESS...AGAIN
Click to Enlarge

Click to Enlarge

Complete replacement outer cabrio cover, with or without the CA logo cast into the carbon finish.

Direct replacement Cabriolet roof cover in black carbon fibre for all E46 cabriolet models.

Please note this is made from high quality real dry carbon fibre and not imitation or wet lay like cheaper alternatives which de laminate and fade readily.

Please specify exact year and model of vehicle when ordering

PLEASE NOTE
Version listed is based on lamination price only. Advertised price is subject to £90 - £150 surcharge for the original core part, or you can supply your own.

Fitting Time: 2.50 hours.
Estimated Installation Cost at CA Workshops: £125.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 6.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Click to Enlarge

Full set of door and bumper moldings in carbon fibre.

Available for all BMW models.

E36 coupe 13 pce version is pictured and priced for on this page (does not include lower front spoiler lip).

Please refer to Variations Section for further options and models, using red link button to top right, or call to discuss your requirements.

*Please specify exact model and body type when ordering.

PLEASE NOTE
List price is subject to £100 surcharge refundable upon reciept of original parts

Fitting Time: 2.00 hours.
Estimated Installation Cost at CA Workshops: £110.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 2.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: ak36cfpl

Click to Enlarge

These are the original factory parts laminated in real carbon fibre from one sheet so as to match the carbon weave as accurately as possible between neighbouring pairs.

The image here shows the E36 4 door version.

Priced as a four piece set.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Full carbon fibre headlamp eyebrows .
Priced as a pair.

This listing is for E36 vehicles, please refer to Variations for other vehicles.

Fitting Time: 20.00 hours.
Estimated Installation Cost at CA Workshops: £25.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 2.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: svcffnd

Click to Enlarge

BONNET UNLATCHED IN THIS CLOSE UP
Click to Enlarge

Click to Enlarge

Direct replacement front wings / fenders for most models.

E46 M3 /CSL version shown and priced here, please contact us for other models ( price may vary between models).

Made in 100% pre - preg autoclaved carbon fibre, the highest grade of carbon construction.

Supplied unpainted/unlaquered.

Priced for one pair.

Estimated Product Shipping Weight inc Packaging: 3.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cacfflcp

Fuel filler caps in carbon fibre for most models.

Image will be added soon.

Fitting Time: 0.20 hours.
Estimated Installation Cost at CA Workshops: £20.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Fits beneath OEM lip on M3 style front bumper, providing a lower appearance and adding frontal downforce for better road holding at high speed.

This version is in rear carbon fibre, also available in paintable plastic, please see variations.

Fitting Time: 1.30 hours.
Estimated Product Shipping Weight inc Packaging: 4.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cfihl1

Click to Enlarge

Full 100% Carbon Fibre head lining available for all BMW models.

Unit comes as a single piece & retains all factory mounting holes and points.

Options are with or without sunroof aperture

please call to discuss options and prices

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: captbonnet

100 % carbon fibre, perfect fit on to factory hinges and latches. Weighs only 5.5 kilos!

Can be laquered to leave carbon weave showing or painted body colour.

Fitting Time: 1.15 hours.
Estimated Installation Cost at CA Workshops: £75.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 8.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: axcafrf

Click to Enlarge

SUNROOF PANEL
Click to Enlarge

Made from 100% pre preg carbon fibre, our carbon roof panels are a direct replacement for the OEM part, providing a weight saving of between 20 - 40 kgs, depending on vehicle model and roof type. As this weight is shaved straight off the highest point of the car then the centre of gravity is also significantly lowered, leading to considerably better handling and road holding.

This panel is at least as strong as the steel one it replaces, so no concern over safety issues.

* Panel shown in images and quoted cost below is for E36 4 door with sunroof, we can make a similar for almost any make / model vehicle, please call us for a quote for your application.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cacafskirts

Click to Enlarge

Direct replacement side skirts for most models available in real carbon fibre finish.

Priced per pair.

This listing based on E46 M3, please contact our sales department for pricing on other models

PLEASE NOTE
Version listed is based on lamination price per pair. Advertised price is subject to £60 surcharge refundable upon reciept of original parts

Fitting Time: 2.00 hours.
Estimated Installation Cost at CA Workshops: £120.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 6.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cacfsplt-2

Click to Enlarge

As well as looking good this splitter / cannard package adds real downforce to the front and mid sections of the car by limiting the amount of air that can get under the car, thereby creating negative pressure beneath the car.

Made from 100% pre preg carbon fibre (NOT a laminate) this kit consists of :

- left / right front bumper splitters
- left / right side skirt rear cannards

These parts are custom made on site for each order and only available as a supply and install package, parts not avaialble just on their own.

It is advisable (but not essential) to add a rear downforce aid such as boot spoiler or lower diffuser to complement this package, if the car does not already have such.

Z4M version shown here, but available most models.

PRICE INCLUDES INSTALLATION

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: nve36dh

Click to Enlarge

Direct replacement E36 door handles in carbon fibre laminate.

priced per pair.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Click to Enlarge

This version boot lid has a composite core with real carbon fibre outer surface layer.

Direct fit onto factory hinges and locks etc.

Can be laquered or painted to suit your preference.

For coupe and convertible models.

Fitting time quoted below does NOT include painting.

Fitting Time: 1.30 hours.
Estimated Installation Cost at CA Workshops: £85.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 6.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cafucafifrkit

M3 full carbon fibre front oem replacement splitter lip and additional corner splitters, complete with support brackets.

Adds style and function.

Splitter lip availabe seperately also please enquire.

Priced here as complete set.

Fitting Time: 1hr 20 mins

Estimated Product Shipping Weight inc Packaging: 4.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: nv36rerdifcf

Click to Enlarge

OEM style rear lower bumber insert in carbon fibre.
Direct fit.

Estimated Product Shipping Weight inc Packaging: 7.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Click to Enlarge

These rear molded splitters attach easily to the bottom of the sides of the E36 rear bumper to add a distinctive but quite subtle visual enhancement.

Can later be removed without damage to the bumper or splitter.

Available in carbon fibre or smooth black plastic finish, the latter being paintable also.
NOTE: This page lists the Carbon Fibre versions, please see Variations Section ( use red link button at top right) to order plastic versions.

Priced as pair.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: sme46cbwe92v

Click to Enlarge

Made from carbon fibre, this bonnet is to replicate the E9* M3 bonnet vents onto the E46 range. Some people think the GTR style bonnet is too much and often ask us to we offer a bonnet with smaller vents....well now we can say yes.

The bonnet looks classy adn not over the top and makes a good weight saving aswell weighing in at only 10kg.

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: cafucafirediffuser

Originally intended for Motorsport use, can be adapted to fit rear of most street cars too.

Increases downforce at rear of car by venturi effect.

Matching frontal aerodynamic aids also available, please enquire.

Standard size is 27 inches long, 41 wide overall, tunnel section only is 36 inches wide, but we can manufacture to any size needed.
2 kilos in weight.

Prices from £725 dependant on size and configuration, please enquire.

Estimated Product Shipping Weight inc Packaging: 3.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010