CA: Transmission & Driveline

Click to Enlarge

For race use only.

If you want to prevent torque loss and are tired of the missed shifts and issues related to soggy, failure-prone mounts, then solid mounts are the solution.

Solid Engine & Transmission Mounts eliminate all flexing and mount failures that can occur due to movement in your drivetrain. Many failures happen because Mounts are not "bolt though type". Our mounts are basically indestructible and have been used on 4-digit horsepower cars for the ultimate in torture test proven reliability.

Solid mounts also give increased rear wheel torque (a portion of the engine's torque output is used in lifting the engine / gearbox against the OE type rubber mounts)

All mounts are beautifully machined from 6061 T6 billet aluminum in the USA.

*(Please see variations section for model specific listings by using the red link button at above right. )*

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: rotrmounts

Click to Enlarge

What is a transmission mount?

The transmission mounts in a BMW are a common part that is frequently overlooked.

The transmission mount is designed to do the following:

Help stabilize the transmission under vehicle load allowing the shifter to engage into gear properly.
Isolate vibration from the drivetrain to the chassis.

Under engine load, the transmission can wiggle left and right slightly, worse when the car is being driven hard into turns. This unwanted movement may potentially causing the driver to miss shift. When we sought to have our own transmission mounts produced, we wanted them to be compliant for street use, with no compromises in performance.

What we have is a transmission mount made from Neoprene rubber, with a completely different shape than the factory mount. The hourglass shape of the factory mount is not the best for stabilizing the transmission. By changing the shape to the cylindrical shape of the Rogue Engineering mount, it reduces deflection significantly, while maintaining damping.

The Rogue Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Cadmium plated to prevent corrosion.

Note: Priced as a pair.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg