CA: Carbon Fibre Products

Product Code: vsswhcps-1

Click to Enlarge

Full carbon fibre wheel caps to fit most models.
Priced as a set of four .

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: jkcfbcsb

Click to Enlarge

100% CARBON FIBRE BUMPER CARRIERS / BEAMS

Many BMW models have heavy metal bumper carriers / supports.

We custom manufacture exact replica replacements but made in 100% carbon fibre for added strength and a huge saving in weight ( eg E39 M5 front carrier in carbon = approximately 3kgs )

Prices vary depending on model, but as an example front and rear carrier pair for the E39 M5 costs £1780.00 / pair ( as of July 2011), please call us for exact costings.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Click to Enlarge

Full set of door and bumper moldings in carbon fibre.

Available for all BMW models.

E36 coupe 13 pce version is pictured and priced for on this page (does not include lower front spoiler lip).

Please refer to Variations Section for further options and models, using red link button to top right, or call to discuss your requirements.

*Please specify exact model and body type when ordering.

PLEASE NOTE
List price is subject to £100 surcharge refundable upon reciept of original parts

Fitting Time: 2.00 hours.
Estimated Installation Cost at CA Workshops: £110.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 2.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: ak36cfpl

Click to Enlarge

These are the original factory parts laminated in real carbon fibre from one sheet so as to match the carbon weave as accurately as possible between neighbouring pairs.

The image here shows the E36 4 door version.

Priced as a four piece set.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: svcffnd

Click to Enlarge

BONNET UNLATCHED IN THIS CLOSE UP
Click to Enlarge

Click to Enlarge

Direct replacement front wings / fenders for most models.

E46 M3 /CSL version shown and priced here, please contact us for other models ( price may vary between models).

Made in 100% pre - preg autoclaved carbon fibre, the highest grade of carbon construction.

Supplied unpainted/unlaquered.

Priced for one pair.

Estimated Product Shipping Weight inc Packaging: 3.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cfihl1

Click to Enlarge

Full 100% Carbon Fibre head lining available for all BMW models.

Unit comes as a single piece & retains all factory mounting holes and points.

Options are with or without sunroof aperture

please call to discuss options and prices

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: axcafrf

Click to Enlarge

SUNROOF PANEL
Click to Enlarge

Made from 100% pre preg carbon fibre, our carbon roof panels are a direct replacement for the OEM part, providing a weight saving of between 20 - 40 kgs, depending on vehicle model and roof type. As this weight is shaved straight off the highest point of the car then the centre of gravity is also significantly lowered, leading to considerably better handling and road holding.

This panel is at least as strong as the steel one it replaces, so no concern over safety issues.

* Panel shown in images and quoted cost below is for E36 4 door with sunroof, we can make a similar for almost any make / model vehicle, please call us for a quote for your application.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cacafskirts

Click to Enlarge

Direct replacement side skirts for most models available in real carbon fibre finish.

Priced per pair.

This listing based on E46 M3, please contact our sales department for pricing on other models

PLEASE NOTE
Version listed is based on lamination price per pair. Advertised price is subject to £60 surcharge refundable upon reciept of original parts

Fitting Time: 2.00 hours.
Estimated Installation Cost at CA Workshops: £120.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 6.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cacfsplt-2

Click to Enlarge

As well as looking good this splitter / cannard package adds real downforce to the front and mid sections of the car by limiting the amount of air that can get under the car, thereby creating negative pressure beneath the car.

Made from 100% pre preg carbon fibre (NOT a laminate) this kit consists of :

- left / right front bumper splitters
- left / right side skirt rear cannards

These parts are custom made on site for each order and only available as a supply and install package, parts not avaialble just on their own.

It is advisable (but not essential) to add a rear downforce aid such as boot spoiler or lower diffuser to complement this package, if the car does not already have such.

Z4M version shown here, but available most models.

PRICE INCLUDES INSTALLATION

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cae34cfbnt

Click to Enlarge

Made from 100% pre - preg carbon fibre, this stylish bonnet adds form and function to any E34 as well as saving weight.

Fits onto factory hinges, locks etc, weighs approx 7 kgs.

Fitting Cost quoted below does NOT include any painting.

Fitting Time: 1.50 hours.
Estimated Installation Cost at CA Workshops: £100.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 9.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: cafucafirediffuser

Originally intended for Motorsport use, can be adapted to fit rear of most street cars too.

Increases downforce at rear of car by venturi effect.

Matching frontal aerodynamic aids also available, please enquire.

Standard size is 27 inches long, 41 wide overall, tunnel section only is 36 inches wide, but we can manufacture to any size needed.
2 kilos in weight.

Prices from £725 dependant on size and configuration, please enquire.

Estimated Product Shipping Weight inc Packaging: 3.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: acsukp-2

Click to Enlarge

We can now offer Genuine AC SCHNITZER parts.

We have been appointed OFFICIAL UK DEALERS by AC SCHNITZER UK.

We offer all products from all the ranges including: styling / chassis / wheels etc…

Please see our ACS on line price and image list HERE,

We offer minimum 5% discount from the listed prices. Select “picture view” option at the top to see product images. Note the product page has it’s own “internal” vertical scroll bar.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CA AUTOMOTIVE FOR PBMW MAG 2010

Product Code: vrsmattef

Click to Enlarge

A New Matte range from Vorsteiner available on all of their carbon products.

Because matte paint and vehicle wrapping has become so big they have catered for the the market by producing a matte carbon finish. Available on all of the their extensive product ranges these are sure to add the finishing touches to the car.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg