CA: Engine Performance (see also forced induction & remapping sections)

Product Code: bmcrpfoem

Click to Enlarge

E60 M5 KIT
Click to Enlarge

High flow / high performance air filters that simply replace the factory original versions within the factory airbox.

PERFORMANCE
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

ADVANCED TECHNOLOGY
BMC technical staff has developed a particular production system based on soft rubber moulding which produces the familiar BMC red filters. They are made in one single piece with no welded joints in the corners, thus avoiding breaking risks. This system, called "Full Moulding" comes from R&D in F1 and it is significant of BMC air filters' technical and quality specifics.

PLEASE REFER TO EXCELL PRICE AND APPLICATION LIST BY CLICKING THE LINK BELOW.

BMC DIRECT REPLACEMENT PANEL FILTERS PRICE LIST

Product Code: dbifmik

Click to Enlarge

The dbilas dynamic FlowMaster air filter systems are pre-mounted and ready to be installed.

The kits contain:

- the FlowMaster air filter box with filter cartridge,
- a dbilas dynamic FlowPipe,
- hoses and necessary holders.

The FlowPipe air intake in connection with the FlowMaster, in order to prevent, that the engine sucks up warm air from the engine compartment

Estimated Product Shipping Weight inc Packaging: 15.00 Kg

Product Code: dbim50m52tbk

Click to Enlarge

All throttle body kits are pre-mounted and ready to be installed. The kit contains fitting instructions, throttle bodies, intake manifold, airbox, throttle control linkage and all necessary small parts.

*(After conversion an adjustment of the engine management is required. This isn´t including in price)*

The specified performance enhancing refers to standard engines with throttle body kit and adjustment of the engine management.

- Simple assembly

- Emission regulations are maintained

- High quality aliminium components

- Sporty modern design

- The engine does not have to be opened

- Life span is not shortened

- Checked by the German TÜV

- System is ready for installation

The multi throttle body intake systems produced by our company is the successor of our double carburetor kits.

As is the case for the double carburetor kits the objective here is also the optimum artificial respiration of the engine.

For this reason, instead of the central throttle valve used for the sucking of all cylinders in the conventional intake systems, this system only has one throttle valve for each cylinder.

In combination with one injection valve per cylinder, this system offers optimum filling of cylinders throughout the whole speed range of the engine.

Another advantage of the dbilas dynamic multi-throttle body intake systems is that it offers the possibility of using "sharper" camshafts without negative influence on the smoothness of running. Only this method allows aspirating engines to achieve high liter performance.

Due to the same suction pipe length and simultaneously the same data a better mixture of the fuel and the asprated air is provided. Consequently the combustion is more efficient which results in an improvement of the fuel consumption in some operation areas.

A characteristic feature of our multi-throttle body intake systems is that not only the pollution classification of the vehicle is maintained but also the good running culture according to standard.

These characteristics remain unchanged, since all electronic sensors and actuators such as injection valves, air flow sensors or meters, throttle switches and idle control valves continue to be used in the systems.

Estimated Product Shipping Weight inc Packaging: 25.00 Kg

Product Code: mgslide

Click to Enlarge

Slide throttles operate just like they sound, in that the throttle plates slide sideways, instead of rotating about an axis as for butterflies in more traditional throttle body set ups.

Mainly used for racing, the advantage is that when the throttles are fully open, the plates are completely removed from the airflow, so there is no obstruction blocking the inlet path to the combustion chambers.

Currently availabble for S54 and some V8 engines, please enquire for details.

Estimated Product Shipping Weight inc Packaging: 4.00 Kg