CA: Chassis, Suspension & Steering Upgrades

Click to Enlarge

rubber protective “boots”
Click to Enlarge

Adjustable end link for many BMW front Anti-Roll bars.
Ground Control exclusive machined billet stainless steel tapered adapters press fit into stock holes. Adjustable length 6061 anodized rod, with wrench flats and jam nuts. 3 piece Aurora rod ends. Fits E30 M3, E36 M3, M coupe/Roadster and E46M3.

PLEASE NOTE Does not fit regular e30 or e36.

*(rubber protective “boots” available as an option)*

Fitting Time: 1.00 hour.

Product Code: gcadjrcca3646m

Click to Enlarge

For street and race use ...

Camber adjustable lower control arm for e46, e46M3 or late e36M3.Offset bracket protects crossmember.

Estimated Product Shipping Weight inc Packaging: 6.00 Kg

Product Code: gcfcarmbrng

Click to Enlarge

E30 M3 geometry, use ONLY with e30, e30 M3, or 92-95 e36 control arms. For 96-99 M3, use "m3bearing96" ( please enquire).

Priced as a pair

PLEASE SPECIFY YOUR EXACT VEHICLE MODEL WHEN ORDERING.

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Click to Enlarge

Ground control Street version camber mounts.

The street version is the only version to be used with street springs, and is designed with features that harmonize with more conservative springs.

*(Please see varients section for models available)*

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: gc3646rtabrng

RACE ONLY.
Rear trailing arm bearing for e36, e46. Highest quality American bearing in a billet aluminum carrier. Bearing is seperately mounted, so variations in trailing arm width do not affect reliability. Metal to metal rigidity makes us recommend this for race cars only. This bearing is bolted in, not pressed into place, so it will not loosen over time.

Sold as a pair.

PLEASE SPECIFY EXACT MODEL WHEN ORDERING

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: gcracefcm

Click to Enlarge

More camber adjustment than stock, caster adjustment, aircraft bearings, engraved with calibrated degrees, with stainless steel reinforcement. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product. The stainless steel reinforcement prevents electrolysis between the steel fender and the aluminum camber plate.

Camber and caster are separately adjustable by sliding the mounts, without removing any components from the car. The priority of this design is to allow fast, repeatable alignment changes at the track.

The Ground Control camber plates feature two sets of bearings, a proprietary bearing, made to our specs by Aurora in the USA, which allows for articulation of the shock shaft. This spherical bearing is very understressed, as the Ground Control design does NOT support the weight of the car on the spherical bearing. Instead, the weight of the car is supported by a completely separate articulating needle bearing, which is also manufactured for Ground Control in the USA. Will not fit stock springs

Estimated Product Shipping Weight inc Packaging: 10.00 Kg

Product Code: gc46m3baljnt

Click to Enlarge

RACING ONLY.

Adjustable height lower ball joint. Bolts into aluminum control arms. Used on race winning Speed Channel cars. Uses Aurora bearings made exclusively for Ground Control.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

Product Code: gcrcersm

Click to Enlarge

Rear shock mount to fit BMW, only recommended for race cars.

Complete with shock stem adapters.Uses a spherical bearing instead of urethane or rubber. Please specify 10, 12, 14 or 16mm stem diameter.

Billet aluminum with spherical bearings.

Note that ALL Ground Control rear shock mounts are clamped to the body for extra strength. Price per pair.

Estimated Product Shipping Weight inc Packaging: 3.00 Kg